Tricot Panel

tricot_zenitale.jpg
TRICOT CA NARDI_02.jpg
TRICOT CA NARDI_01.jpg
TRICOT CA NARDI_03.jpg
TRICOT_AMBIENTATA_01.jpg
Trame_Geometrie_Tricot_Ca_Melli_2019.jpg
tricot_zenitale.jpg
TRICOT CA NARDI_02.jpg
TRICOT CA NARDI_01.jpg
TRICOT CA NARDI_03.jpg
TRICOT_AMBIENTATA_01.jpg
Trame_Geometrie_Tricot_Ca_Melli_2019.jpg

Tricot Panel

0.00

TECHNICAL DATA

OAK PANEL/BIRCH MULTILAYER BACK SUPPORT /2 LAYERS/PREFINISHED 20 MM (3/4”) /TOP LAYER 4 MM

TOP LAYER
SINGLE-PLANK NOBLE LAYER IN SOLID WOOD THICKNESS 4 MM +/- 5%

BACK SUPPORT
MULTILAYER BIRCH PANEL

WORKING - FINISHES
BRUSHING, AGING EFFECT. FINISHED WITH VARNISH, OIL OR WAX

THICKNESS
20MM (3/4”)

WIDTHS
590 MM (23.25”)

LENGHTS
590 MM (23.25”)

CERTIFICATION
MADE IN ITALY CE

APPLICABLE CODES
UNI EN 14342 :2005+A1:2008

LAYING
FLOATING OR GLUED

PROFILING AND CONNECTION
TONGUE & GROOVE 4 SIDES + BEVEL

INSTALLATION ON UNDERFLOOR HEATING SYSTEM
SUITABLE (AVOID SURFACE TEMPERATURE ABOVE 28° C. REFER TO EXTENDED LAYING AND MAINTENANCE INSTRUCTIONS)

CLEANING AND MAINTENANCE
CLEAN WITH VACUUM CLEANER OR DAMP CLOTH WELL WRUNG. AVOID CLEANING WITH ALCOHOL, SOLVENTS, AMMONIA BASED PRODUCTS

USE AND MAINTENANCE INSTRUCTIONS
THE FLOORING MUST BE STOCKED IN DRY ENVIRONMENTS. LAYING MUST BE CARRIED OUT AFTER INSTALLATION OF EXTERNAL DOORS AND WINDOWS AND ONCE THE PLASTERING IS FULLY DRY, ALL OTHER FLOORING AND WALL TILES MUST BE ALREADY INSTALLED. ENVIRONMENTAL CONDITIONS: TEMPERATURE BETWEEN 15 AND 25°C AND HUMIDITY BETWEEN 45% AND 60%. RESIDUAL HUMIDITY OF THE SUBFLOOR (CONCRETE SCREED) MUST BE ≤2 %. IN CASE OF SUBFLOORING HEATING SYSTEM INSTALLATION MUST BE CARRIED OUT AND ONLY AFTER ITS TESTING. SUBFLOORING CONDITIONS MUST BE PREVIOUSLY VERIFIED (LEVELING, CONSISTENCY, ETC.) EXCESSES OF GLUE MUST BE IMMEDIATELY REMOVED BY MEANS OF SPECIFIC CLEANING PRODUCTS. AVOID COVERING THE FLOOR WITH RUGS OR FURNITURE UNTIL FLOORING EVENING OUT. IN CASE OF ACCIDENTAL WATER OR LIQUID SPILL MOP AS SOON AS POSSIBLE.

Made in Italy

Add To Cart