Intrecci Panel

intrecci-trame-geometrie-ca-corner-fogliedoroparquet.jpg
intrecci-trame-geometrie-fogliedoroparquet.jpg
intrecci-trame-geometrie-ca-corner-fogliedoroparquet.jpg
intrecci-trame-geometrie-fogliedoroparquet.jpg

Intrecci Panel

$0.00

TECHNICAL DATA

OAK PANEL/BIRCH MULTILAYER BACK SUPPORT /2 LAYERS/PREFINISHED 20 MM (3/4”)/TOP LAYER 4 MM

TOP LAYER
SINGLE-PLANK NOBLE LAYER IN SOLID WOOD THICKNESS 4 MM +/- 5%

BACK SUPPORT
MULTILAYER BIRCH PANEL

WORKING - FINISHES
BRUSHING, AGING EFFECT. FINISHED WITH VARNISH, OIL OR WAX

THICKNESS
20MM (3/4”)

WIDTHS
1000MM (40”)

LENGHTS
1000MM (40”)

CERTIFICATION
MADE IN ITALY CE

APPLICABLE CODES
UNI EN 14342 :2005+A1:2008

LAYING
FLOATING OR GLUED

PROFILING AND CONNECTION
TONGUE & GROOVE 4 SIDES + BEVEL

INSTALLATION ON UNDERFLOOR HEATING SYSTEM
SUITABLE (AVOID SURFACE TEMPERATURE ABOVE 28° C. REFER TO EXTENDED LAYING AND MAINTENANCE INSTRUCTIONS)

CLEANING AND MANINTENANCE
CLEAN WITH VACUUM CLEANER OR DAMP CLOTH WELL WRUNG. AVOID CLEANING WITH ALCOHOL, SOLVENTS, AMMONIA BASED PRODUCTS

USE AND MAINTENANCE INSTRUCTIONS
THE FLOORING MUST BE STOCKED IN DRY ENVIRONMENTS. LAYING MUST BE CARRIED OUT AFTER INSTALLATION OF EXTERNAL DOORS AND WINDOWS AND ONCE THE PLASTERING IS FULLY DRY, ALL OTHER FLOORING AND WALL TILES MUST BE ALREADY INSTALLED. ENVIRONMENTAL CONDITIONS: TEMPERATURE BETWEEN 15 AND 25°C AND HUMIDITY BETWEEN 45% AND 60%. RESIDUAL HUMIDITY OF THE SUBFLOOR (CONCRETE SCREED) MUST BE ≤2 %. IN CASE OF SUBFLOORING HEATING SYSTEM INSTALLATION MUST BE CARRIED OUT AND ONLY AFTER ITS TESTING. SUBFLOORING CONDITIONS MUST BE PREVIOUSLY VERIFIED (LEVELING, CONSISTENCY, ETC.) EXCESSES OF GLUE MUST BE IMMEDIATELY REMOVED BY MEANS OF SPECIFIC CLEANING PRODUCTS. AVOID COVERING THE FLOOR WITH RUGS OR FURNITURE UNTIL FLOORING EVENING OUT. IN CASE OF ACCIDENTAL WATER OR LIQUID SPILL MOP AS SOON AS POSSIBLE.

Made in Italy

Add To Cart